Brief description: The satellite signal is received via the optical LNB, one Fibre Optic lead is then run from the LNB to a splitter (Up to 8 outputs), the splitter feeds up to 8 virtual Twin, Quad or Quattro Optical fibre units for up to 32 homes. All cables are supplied Pre-terminated, just order the cable lengths required and plug in.
Further details can be found at: Fibre Optic Distribution
The only additional equipment needed is the satellite dish and the satellite cable from the virtual convertors to the Sky or European receivers.
Fibre Optic LNB
Use this Satellite dish LNB in place of a std LNB. The LNB has a 40mm neck to fit most satellite dishes, independently powered by 12v DC supply (Included with LNB).
Virtual Twin Fibre optic convertor
The Virtual Twin converts optical signals via the cable from the Optical LNB to IF, providing 2 universal satellite feeds from one optical connection.
Virtual Quad Fibre Optic Convertor
The Virtual Quad converts optical signals via the cable from the Optical LNB to IF, providing 4 universal satellite feeds from one optical connection.
Virtual Quattro Fibre Optic Convertor
The Virtual Quatro converts optical signals from the Optical LNB to IF, providing 4 fixed satellite feeds from one optical connection.
IE: Horiz/High, Vertical/High, Horiz/Low, Vertical/Low.
Fibre Optic Splitters
These are used to split the signal from the Optical LNB prior to distribution via the virtual convertors. 2 way splitter.
Light Source Fault Finder Pen
For testing fibre network and terminations. The NEW GI FibreMDU Visible Light Source is designed to assist the installer during installation in finding faults within the optical cable, after fitting connectors. It does this by beaming a low powered red laser light through the fibre cable to show where there may be leakage or damaged areas.
For use of short optical runs where by the optical signal is too high, come in sizes -5db -10db -15db